Search AWWA

image

Search AWWA

c304

AWWA Website

Resource Topic

Web Page

event

award

policy statement

Article

AWWA Store

standards

manuals

books

remote learning

AWWA COMMENT PERIOD ON AWWA C304, Design of Prestressed Concrete Cylinder Pipe (reaffirmation of ANSI/AWWA C304-2014 (R2019))

AWWA COMMENT PERIOD ON AWWA C304, Design of Prestressed Concrete Cylinder Pipe (reaffirmation of ANSI/AWWA C304-2014 (R2019)) July 29, 2024 AWWA solicits public comments on all proposed new AWWA Standards, and on all proposed revisions, reaffirmations, or withdrawals of existing AWWA Standards. The referenced standards project is being considered for approval and the publication of […]

C304-92: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure.

C304-99: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-07 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger. The design for longitudinal hydrostatic thrust restraint of prestressed concrete cylinder pipe is not addressed in this standard. See AWWA Manual M9, Concrete Pressure Pipe, for information on this topic.

AWWA C304-14 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R19) Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R24) Design of Prestressed Concrete Cylinder Pipe

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R24) Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

C304-92: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure.

C304-99: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-07 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger. The design for longitudinal hydrostatic thrust restraint of prestressed concrete cylinder pipe is not addressed in this standard. See AWWA Manual M9, Concrete Pressure Pipe, for information on this topic.

AWWA C304-14 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R19) Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R24) Design of Prestressed Concrete Cylinder Pipe

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R24) Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

C304-92: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure.

C304-99: AWWA Standard for Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-07 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger. The design for longitudinal hydrostatic thrust restraint of prestressed concrete cylinder pipe is not addressed in this standard. See AWWA Manual M9, Concrete Pressure Pipe, for information on this topic.

AWWA C304-14 Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

AWWA C304-14(R19) Design of Prestressed Concrete Cylinder Pipe (PDF)

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger.

Standards

From source to distribution, AWWA Standards cover the products and processes related to all areas of water treatment and supply.

AWWA C301-07 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type (PDF)

This standard describes the manufacture of circumferentially prestressed concrete pressure pipe with a steel cylinder and wire reinforcement in sizes 16 in. (410 mm) through 144 in. (3,660 mm). Larger sizes have been manufactured based on the concepts presented in this standard. The standard describes two types of prestressed pipe: lined-cylinder pipe with a core composed of a steel cylinder lined with concrete and subsequently wire-wrapped and coated with premixed mortar; and, embedded-cylinder pipe with a core composed of a steel cylinder encased in concrete and subsequently wire wrapped and coated with premixed cement mortar. The design of prestressed concrete pipe is not presented in this standard but is the subject of ANSI/AWWA C304, Design of Prestressed Concrete Cylinder Pipe. ANSI/ AWWA C301 also does not include requirements for handling, delivering, laying, field testing, or disinfecting of pipe. See AWWA Manual M9, Concrete Pressure Pipe, for this information.

AWWA C301-07 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type (PDF)

This standard describes the manufacture of circumferentially prestressed concrete pressure pipe with a steel cylinder and wire reinforcement in sizes 16 in. (410 mm) through 144 in. (3,660 mm). Larger sizes have been manufactured based on the concepts presented in this standard. The standard describes two types of prestressed pipe: lined-cylinder pipe with a core composed of a steel cylinder lined with concrete and subsequently wire-wrapped and coated with premixed mortar; and, embedded-cylinder pipe with a core composed of a steel cylinder encased in concrete and subsequently wire wrapped and coated with premixed cement mortar. The design of prestressed concrete pipe is not presented in this standard but is the subject of ANSI/AWWA C304, Design of Prestressed Concrete Cylinder Pipe. ANSI/ AWWA C301 also does not include requirements for handling, delivering, laying, field testing, or disinfecting of pipe. See AWWA Manual M9, Concrete Pressure Pipe, for this information.

AWWA C301-07 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type (PDF)

This standard describes the manufacture of circumferentially prestressed concrete pressure pipe with a steel cylinder and wire reinforcement in sizes 16 in. (410 mm) through 144 in. (3,660 mm). Larger sizes have been manufactured based on the concepts presented in this standard. The standard describes two types of prestressed pipe: lined-cylinder pipe with a core composed of a steel cylinder lined with concrete and subsequently wire-wrapped and coated with premixed mortar; and, embedded-cylinder pipe with a core composed of a steel cylinder encased in concrete and subsequently wire wrapped and coated with premixed cement mortar. The design of prestressed concrete pipe is not presented in this standard but is the subject of ANSI/AWWA C304, Design of Prestressed Concrete Cylinder Pipe. ANSI/ AWWA C301 also does not include requirements for handling, delivering, laying, field testing, or disinfecting of pipe. See AWWA Manual M9, Concrete Pressure Pipe, for this information.

Standards List

Explore AWWA’s water industry standards. As technologies evolve, AWWA Standards are a trusted resource that reflect the state of the industry.

Load More

Advertisement