SAVE THE DATE FOR ACE21 | SAN DIEGO | JUNE 13-16, 2021
Meter Madness

Congratulations to the 2019 Winners!

  • First Place: Joshua Templeton of the Alabama-Mississippi Section at 31.10
  • Second Place: Tommy McCormick, Texas, 32.09
  • Third Place: Carlos Camacho, Pacific-Northwest, 43.40

Greetings!

We hope that each of you continue to remain healthy and safe during this time.

This is a reminder that for ACE21, the meter that will be used will be the Mueller water meter 5/8” x ¾” 420 bronze positive displacement meter.

All practice meters for the 2021 competition were distributed between July 2019–May 2020. Practice meters will no longer be distributed for the 2021 Meter Madness competition since competitors and Sections should have everything required for the 2021 Annual Conference & Exposition.

Mueller Water Company will not provide additional practice meters for the remainder of 2020 and leading up to the 2021 Meter Madness competition. They have gone above and beyond supplying water meters for competitors and Sections and we determined that it would be unfair to ask Mueller to provide meters for two consecutive years due to the financial commitment required.

We appreciate the donations from Mueller and look forward to seeing you all compete in 2021 in San Diego (June 13-16, 2021).

Sincerely,

AWWA Meter Madness Subcommittee & AWWA Staff

Meter Madness Hall of Fame


2019 in Denver, Colo.
1st Place – Joshua Templeton, Alabama-Mississippi, 31.10 
2nd Place – Tommy McCormick, Texas, 32.09
3rd Place – Carlos Camacho, Pacific-Northwest, 43.40

2018 in Las Vegas, Nev.
1st Place – Joshua Templeton, Alabama-Mississippi, 30.44
2nd Place – Leamon Anderson, Texas, 31.37
3rd Place – Carlos Camacho, Pacific Northwest, 33.19 

4th Place – Alex Ouzts South Carolina, 37.34

2017 in Philadelphia, Pa.
Meter Used: Badger Recordall Model 25 with Local Register
1st Place – Miguel Ibarra Caster, Mexico, 32.22 in Semifinals, 38.87 in Finals
2nd Place – Jaime Torres Salazar, Mexico, 30.31 in Semifinals, 38.96 in Finals
3rd Place – Dennis Laskowski, Texas, 34.78 in Semifinals
4th Place – Edward Navarrete, South Carolina, 37.25 in Semifinals

2016 in Chicago, Illinois
Meter Used: Mueller Systems 420 PD Meter
1st Place – Julio Alberto Castillo, SIMAS Monclova y Frontera, Mexico, 14.72
2nd Place – Michael Sherwood, City of Virginia Beach, Virginia
3rd Place – Scott Mays, Beckley, West Virginia
4th Place – Edward R. Navarrete, Isle of Palms, South Carolina

2015 in Anaheim, California
Meter Used: Master Meter MMPD 5/8″ x 3/4″
1st Place – Samantha Dietz, Fredericksburg, Virginia, 33:28
2nd Place – Edward Navarrete, Isle of Palms, South Carolina, 36:25
3rd Place – Mike Sherwood, Virginia Beach, Virginia., 36:00
4th Place – Alejandro Torres Salazar, Monterrey, Nuevo León, Mexico, 1:01:99

2014 in Boston, Massachusetts
Meter Used: Neptune 5/8 T-10
1st Place – Michael Dunavant, Fredericksburg, Virginia, 33:16
2nd Place – Edward Navarrete, Isle of Palms, South Carolina, 34:18
3rd Place – Samantha Mason, Spotsylvania, Virginia, 35:91
4th Place – Richard Greenwell, Troy, Michigan, 49:03

2013 in Denver, Colorado
Meter used: Badger Recordall Nutating Disc Meter Model 25 
1st Place – Michael Dunavant, Fredericksburg, Virginia, 33:31
2nd Place – Maximo Velazquez, Jr., Mount Pleasant South Carolina, 36:15
3rd Place – Scott Mays, Beaver, West Virignia, 37:18
4th Place – Edward Navarrete, Isle of Palms, South Carolina, 37:31

2012 in Dallas, Texas
Meter used: Mueller 420 Series IIS Magnetic Drive Positive Displacement Disc Meter 
1st Place – Edward Navarrete, Isle of Palms, South Carolina, 30:63
2nd Place – Andy Willetts, Grand Rapids, Michigan, 31:63
3rd Place – Kyle Waterfield, Virginia Beach, Virginia, 33:34
4th Place – Eric Smith, Dubois, Indiana, 38:28

2011 in Washington, D.C.
Meter used: Master Meter Postive Displacement 5/8” x ¾” 
1st Place – Seth Casaroti, Fredericksurg ,Virginia; 0:38.37
2nd Place – Jason Escobido, San Antonio, Texas; 0:39.56
3rd Place – Michael Dunavant, Fredericksburg, Virginia; 40.59
4th Place – Brian Rodriguez, Key West, Florida; 1:02.28

2010 in Chicago, Illinois
Meter used: Sensus SR11 
1st – Brian Rodriguez, Florida Keys Aqueduct, Florida 0:36.19
2nd – Ron Kemper, Beaverton, Oregon, 0:35.87
3rd – Michael Dunavant., Fredricksburg, Virginia, 0:37.82
4th – Johnny H. Rodriguez., San Antonio, Texas, 0:45.72

2009 in San Diego, California
Meter used: Neptune 5/8” T-10
1st – Christopher Kozlowski, Charleston, South Carolina, 0:45.38
2nd – Ronald L. Baker Jr., Spotsylvania County, Virginia, 0:46.09
3rd – Ron Kemper, Beaverton, Oregon, 0:101.84
4th – Seth Casarotti, Spotsylvania County, Virginia, 0:140.25

2008 in Atlanta, Georgia
Meter used: Badger, Recordall Model 25 Meter 
1st – Eric Kresmery, Elgin, Illinois, 0:46.69
2nd – Michael Dunavant., Spotsylvania County, Virginia, 0:45:20
3rd – Ronald L. Baker Jr., Spotsylvania County, Virginia, 0: 53.32
4th – Michael Smith, Lansing, Michigan, 1:06.3

2007 in Toronto, Ontario
Meter used: 5/8” – ¾” – 1” Hersey-Meters 400 Series IIS
1st – Greg Presser, Salem, Oregon, 0:50.38
2nd – Ronald Baker Jr., Spotsylvania County, Virginia , 0:55.57
3rd – Toby Cothran, Salem, Oregon, 0: 57.04
4th – Max Velazquez, Mt. Pleasant, South Carolina, 1:00.81
5th – Michael Dunavant, Spotsylvania County, Virginia, 1:12.72
6th – Fred Cleveland, Austin, Texas, 1:10.94

2006 in San Antonio, Texas
Meter used: AMCO #C-700
1st – Greg Presser, Salem, Oregon, 47.12
2nd – Michael Dunavant, Spotsylvania County, Virginia, 47.59
3rd – Mike White, Lynchburg, Virginia, 48.59
4th – Christopher Ray Whorley, Chesterfield Co., Virginia, 53.33
5th – Jim Etheridge, Village of Oswego, Illinois, 54.98
6th – Benjamin Chapa, San Antonio, Texas; 55:03

2005 in San Francisco, California
2005 National Competition was not held

2004 in Chicago, Illinois
Meter used: AMCO #C-700
1st – Michael White, Lynchburg, Virginia, 0:35.72
2nd – Dewayne Vincent, Austin, Texas, 48.49
3rd – Klell Hollar, Orlando, Florida, 50.19
4th – Jason Gainor, Portland, Oregon, 52.80
5th – Michael Sims, Logansport, Illinois, 1:11.00
6th – Larry Gillette, Portland, Oregon, 01:27.70

2003 in Portland, Oregon
Meter used: AMCO #C-700
1st – Jason Gainor, Portland, Oregon, 0:45.72
2nd – Ronald Baker Jr., Spotsylvania County, Virginia, 0:49.70
3rd – David Worthey, Austin, Texas, 0:50.24
4th – Michael White, Lynchburg, Virginia, 0:55.02
5th – Max Velazquez, Isle of Palms, South Carolina, 0:57.15
6th – Curtis Swartz, Fremont, California, 01:03.55
7th – Klell Hollar, Orlando, Florida, 01:04.67
8th – Brett Ransford, Carmel, Indiana, 01:23.97

2002 in Nashville, Tennessee
Meter used: Badger #25
1st – Ronnie Baker Jr. Spotsylvania County, Virginia, 0:41.12
2nd – Max Velazquez, Isle of Palms, South Carolina, 0:46.27
3rd – Curtis Swartz, Fremont, California, 1:02.75
4th – Jason Gainor, Portland, Oregon, 1:04.71
5th – Steven Russel, Logansport, Indiana, 01:11.34
6th – Klell Hollar, Florida, 01:14.61
7th – Benjamin Chapa, San Antonio, Texas, 01:19.02

2001 in San Diego, California
Meter used: Badger #25
1st – Jason Irvine, Lynchburg, Virginia, 0:36.68
2nd – Max Velazquez, Isle of Palms, South Carolina, 0:52:31
3rd – Curtis Swartz, Alameda County, California, 0:52.39
4th – Lionel Galvin, Corpus Christi, Texas, 0:53.22
5th – Ashlyn Foster, Las Vegas, Nevada, 0:60:31
6th – Mike Sims, Logansport, Indiana, 0:66:37

2000 in New Orleans, Louisiana
Meter Used: 5/8” x ¾” Master Multi-Jet C-708 (Master Meters)
1st – Lionel Galvan, Corpus Christi, Texas, 0:20:24
2nd – Johnny Rodriguez, San Antonio, Texas, 0:21:18
3rd – Ronnie Baker Jr., Spotsylvania, Virginia, 0:23:31
4th – Tim Senisbaugh, Fort Wayne, Indiana, 0:23:31
5th – Bruce Miller, Orlando, Florida, 0:28:76
6th – Audrey Benton, Las Vegas, Nevada, 0:40:18

1999 in Reno, Nevada
Meter Used: 5/8” x ¾” Hersey 400 Series IIS (Hersey Meters)
1st – Lionel Galvan, Corpus Christi, Texas, 0:50:11
2nd – Joe Heath, Austin, Texas, 0:50:40
3rd – Michael White, Lynchburg, Virginia, 0:52:81
4th – Sharon Pinkerton, Las Vegas, Nevada, 1:14:93
5th – Matthew Davis, Logansport, Indiana, 1:19:83
6th – Jim Ward, Orlando, Florida, 1:30:95

1998 in Austin, Texas
Meter Used: 5/8” x ¾” Precision Multi-Jet C-708 (Invensys formerly Precision Meters and Sensus Technologies)
1st – Joe Heath, Austin, Texas, 0:43.26
2nd – David Worthey, Austin, Texas, 0:43.77
3rd – Raymond “Bruce” Miller, Orlando, Florida, 0:49.23
4th – Johnny Martinez, San Antonio, Texas, 1:01.22
5th – Matthew Hood, Virginia Beach, Virginia, 1:02:87
6th – Denny Clouse, Medford, Oregon, 1:37.06 seconds

1997 in Norfolk, Virginia
Meter Used: 5/8” x ¾” Kent C-700 (ABB)
1st – Johnny Martinez, San Antonio, Texas, 0:39:37
2nd – Michael White, Lynchburg, Virginia, 0:40.63
3rd Place – Roque “Rocky” Villarreal, San Antonio, Texas, 0:41:59
4th Place – Andy Parsms, Virginia Beach, Virginia, 1:16:03

What materials will be used in ACE21? I've been practicing on the 2020 meter, hydrant, pipe, etc.…
All materials for ACE20 will be used in ACE21. The rotation for meters, hydrants, pipe, and end caps will carry over for 2021. If something changes, this information will be posted online.

What if my Section held the competitions in fall 2019 and will also hold them in fall 2020?
The 2019 returning champions will still be able to seek reimbursement in 2021 for their expenses.

I was a returning champion for 2020, will I still be able to seek reimbursement?
At this time, it is up to the Section to determine which competitors they will send.

How can I still show off my team spirit? My team and I have practiced and were looking forward to ACE20.
We understand that teams have put a great deal of time and effort into preparing for ACE20. We encourage teams to send in photos of them practicing, to post pictures using the #AWWAcompetitions, and to keep the momentum going. Please tag AWWA when posting on Instragram We look forward to seeing all of you compete in 2021!

I am one of the volunteers for the competitions, what happens now?
Subcommittees will be holding conference calls with Staff over the coming weeks and will be strongly encouraged to keep in touch over the summer to help make 2021 a success.

Who should I contact if I have further questions?
For competitors, donors and volunteers, please contact competitions@awwa.org.

If you have further questions regarding refunds, hotel reservations, flights, etc.. please review the FAQ document on the ACE Homepage.

We appreciate and thank you all for the important work you do to protect our most valuable resource. We understand and value the work you do, and we look forward to seeing you all compete in San Diego in June 2021 (June 13-16).

Meter Madness FAQ’s

What is Meter Madness?
Meter Madness is a fast-paced competition where contestants assemble a specified water meter from a bucket of parts.

Where is it held?
Meter Madness Contests are often held during AWWA Section Conferences. The national-level of this contest is conducted at AWWA’s Annual Conference & Exposition (ACE).

Who is eligible to enter?
Two representatives may participate from each Section. In addition, the local host may send a participant. In the case of more than one local host, only one person may enter from the locality.

How can the Section winner enter the national Meter Madness Competition?
Every competitor for the national Meter Madness Contest must pre-register for the contest using an online registration form. Please register by the deadline provided so that the competition coordinators can accommodate all competitors.

Must Competitors register for the Conference?
No, it is not necessary for competitors to register for the entire conference unless they plan to attend professional sessions, etc. Complimentary exhibit hall badges will be provided to participants so they can gain admittance to the hall on the day of the contest.

What is the prize?
A plaque or trophy (to be determined by AWWA) will be awarded to each of the 1st-, 2nd-, and 3rd-place winners at the national-level competition. A crystal trophy will be provided by AWWA to the 1st-place winner, and acrylic paperweights for the 2nd- to the 4th-place winners. The 1st place winner will have his or her expenses reimbursed to compete in the following year’s competition at the AWWA Annual Conference, subject to AWWA expense policies.

What brand of water meters are used?
Sponsoring manufacturers and the Meter Madness Subcommittee determine the yearly meter featured. This meter is specified on the Meter Madness Competitor Info tab, along with a diagram of its assembly.

Will any parts be left out of the buckets?
We do not want to put heavy parts in the bucket because there would be a chance that you could break the other parts when you dump your bucket. Therefore, we will leave the case, bottom plate and the register out of the bucket.

Is your company interested in providing InKind materials for a competition?
Please complete the attached Donor Expression of Interest Form. Completed forms can be sent to the Competition Coordinator.

Meter Madness Competitor Info

Are you looking to compete in the Meter Madness Competition? This section contains all the information you need.

  • Contestants will be provided the BLMJ 5/8”x3/4”
  • Meters are intended for meter assembly and practice. Practice meters are not guaranteed for accuracy and are supplied for competition use only.
  • Tools and a fixture to hold the meter will be provided at the national contest but will not be provided free of charge with practice meters.

AWWA Meter Madness Assembly Instructional Video

AWWA specifically does not endorse products manufactured by sponsors and takes no position concerning the adequacy of such products or their compliance with any AWWA Standard.

Meter Madness Sponsor