Product Detail
Search the store:  

product detail

Back to C606-97: AWWA Standard for Grooved and Shouldered Joints
C606-97: AWWA Standard for Grooved and Shouldered Joints

C606-97: AWWA Standard for Grooved and Shouldered Joints

  • Downloading: Allowed Max downloads:10
Publisher: AWWA
Publication date: 1998
AWWA catalog no: STC_0052576
Media Type: Print, PDF
Number of pages: 24
This standard covers grooved and shouldered joints for ductile-iron pipe, metallic pressure pipe of iron pipe size, and fittings and other components for water service. The standard covers 4-in. through 24-in. (100-mm through 600-mm) diameter grooved ductile-iron pipe, 3/4-in. through 24-in. (19-mm through 600-mm) diameter grooved steel, aluminum, brass, and other metallic pipe of iron pipe size (IPS) dimensions; and 4-in. through 64-in. (100-mm through 1,600-mm) diameter shouldered ends for ductile-iron pipe and metallic pipe of IPS dimensions. The major revisions to this edition of ANSI/AWWA C606-97 include the following: the format has been changed to AWWA standard style; Table 1, covering gasket material grades and physical properties, was added, all tables have been renumbered, the ovality tolerances have been deleted, Table 3 (new number), Pipe OD, has been revised to be consistent with other standards; the figure preceding Table 5 (new number) has been revised to show a rolled groove; Section 6.1 (previously Sec. 3.7) has been revised and now requires field grooves to be identified by the groover's unique mark; the definitions, Sec. 3, have been revised to approved wording, the term "fabricator" has been retained with an explanatory statement added to the foreword under Sec. II.A; the location of the applied load for the hydrostatic deflected flexible joint tests in Figure 4 has been moved from the midpoint of the coupling to the pipe on either side of the coupling to more accurately reflect field conditions, Note II.A.2 has been added to the foreword relating to this loading condition; a statement has been added (Sec. 5.2.2.1) regarding the deflected hydrostatic test, to permit machining of the inside diameter of one pipe to obtain the minimum pipe wall allowed under the groove on one side of the coupling, and machining the key on the other side of the coupling to a diameter that would result in the minimum allowed contact area between it and the other pipe's groove if ductile-iron pipe with maximum and minimum outside diameters cannot be procured; Section I.C, Acceptance; Sec. III, Use of This Standard; Sec. III.B, Modification to Standard; and Sec.V, Comments, have been added to the foreword.
  • List Price: $115.00
  • Member Price: $72.00
 
Want to save more?
Log into see if you qualify for a lower rate.
Members save $43.00 or more Join
Item Details:
This standard covers grooved and shouldered joints for ductile-iron pipe, metallic pressure pipe of iron pipe size, and fittings and other components for water service. The standard covers 4-in. through 24-in. (100-mm through 600-mm) diameter grooved ductile-iron pipe, 3/4-in. through 24-in. (19-mm...
Back to C606-97: AWWA Standard for Grooved and Shouldered Joints
View More View Less

YOU MIGHT ALSO LIKE...

People who bought this also bought...

0