Product Detail

Back to C153/A21.53-06: American National Standard for Ductile-Iron Compact Fittings for Water Service
C153/A21.53-06: American National Standard for Ductile-Iron Compact Fittings for Water Service

C153/A21.53-06: American National Standard for Ductile-Iron Compact Fittings for Water Service

  • Downloading: Allowed Max downloads:10
Publisher: AWWA
Publication date: 2006
AWWA catalog no: STC_0063845
Media Type: PDF, Print
Number of pages: 48
This standard describes 3-in. through 64-in. (76-mm through 1,600-mm) ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying water. Minimum working pressures by size range are as follows: 3-in. through 24-in. (76-mm through 610-mm): 350 psi (2,413 kPa); 30-in. through 48-in. (762-mm through 1,219-mm): 250 psi (1,724 kPa); and, 54-in. through 64-in. (1,400-mm through 1,600-mm): 150 psi (1,034 kPa). Fittings are adequate for the rated working pressure plus a surge allowance of 100 psi or a surge allowance of half the rated working pressure, whichever is less. Fittings with mechanical joints are listed in this standard for the 3-in. through 48-in. (76-mm through 1,219-mm) sizes. The standard also may be used for fittings of these sizes with push-on joints or other joints as agreed on at the time of purchase. Fittings with push-on joints and flanged joints are listed in this standard for the 54-in. through 64-in. (1,400-mm through 1,600-mm) sizes. Fittings with flange joints are not discussed in this standard for sizes 3 in. through 48 in. (76 mm through 1,219 mm) because of the importance of standardized center-to-flange face dimensions for these sizes already described in ANSI/AWWA C110/A21.10. Fittings with plain ends are listed for bends and reducers of the 3-in. through 64-in. (76-mm through 1,600-mm) size range and for tees and crosses of the 54-in. through 64-in. (1,400-mm through 1,600-mm) size range. The major revisions in this edition of ANSI/AWWA C153/A21.53 are as follows: Sec. 4.3.1.1 was revised to reference ANSI/AWWA C111/A21.11 for details of mechanical-joint bell, plain end, and accessories, and the figure and table providing details of the mechanical joint were deleted from this standard; and, rejection language was removed from Sec. 5.7 and 5.8 and replaced with Nonconformance.
  • List Price: $115.00
  • Member Price: $72.00
 
Want to save more?
Log into see if you qualify for a lower rate.
Members save $43.00 or more Join
Item Details:
This standard describes 3-in. through 64-in. (76-mm through 1,600-mm) ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying water. Minimum working pressures by size range are as follows: 3-in. through 24-in....
Back to C153/A21.53-06: American National Standard for Ductile-Iron Compact Fittings for Water Service
View More View Less

YOU MIGHT ALSO LIKE...

People who bought this also bought...

0