Look Inside
This standard describes minimum requirements for rubber-seated butterfly valve assemblies 78 in. (2,000mm) diameter and larger, used in potable water service.
Sorry, this item can only be purchased by current members.
Would you like to...
This standard establishes minimum requirements for rubber-seated butterfly valve assemblies, 78 in. (2,000 mm) diameter and larger with flanged ends for fresh and reclaimed water having a pH range from 6–12 and a temperature range from 33°–125°F (0.6°–52°C) and suitable for a maximum steady-state...
This standard establishes minimum requirements for rubber-seated butterfly valve assemblies, 78 in. (2,000 mm) diameter and larger with flanged ends for fresh and reclaimed water having a pH range from 6–12 and a temperature range from 33°–125°F (0.6°–52°C) and suitable for a maximum steady-state fluid working pressure of 250 psig (1,724 kPa [gauge]), a maximum steady-state differential pressure of 250 psi (1,724 kPa), and a maximum full open fluid velocity of 16 ft/sec (4.9 m/sec) based on nominal valve size.
Major revisions to this edition include the following:
Downloadable versions of current and historical standards are also available.
0