Standards

 

ANSI-Accredited Standards of Minimum Requirements

 

The American Water Works Association first published consensus documents in 1908. Today there are more than 180 AWWA Standards. From source to storage, from treatment to distribution, AWWA standards cover all areas of water treatment and supply.
 
These documents reflect the state of the industry. As new technologies emerge, new Standards develop. 
 
AWWA standards cover hundreds of products, services and procedures. Here are the categories covered in AWWA standards
 
These AWWA standards address all facets of water treatment and delivery.

 

 

standards

Latest Standards

B506-18 Zinc Orthophosphate

This standard describes zinc orthophosphate (ZOP) corrosion inhibitor in dry and liquid forms for use in the treatment of potable water, wastewater, or reclaimed water. This standard can be referenced in documents for purchasing and receiving ZOP and can be used as a guide...

C105/A21.5-18 Polyethylene Encasement for Ductile-Iron Pipe Systems

The purpose of this standard is to provide the minimum requirements for polyethylene sheet and tubes to be used for external corrosion protection of buried ductile-iron pipe, fittings, and appurtenances...

C305-18 CFRP Renewal and Strengthening of Prestressed Concrete Cylinder Pipe

The purpose of this standard is to provide the minimum requirements for material selection, design, installation, and quality control and quality assurance of the CFRP renewal and strengthening of PCCP....

C621-18 Internal Pipe Joint Seal Assemblies

The purpose of this standard is to provide the minimum requirements for selection and installation of internal pipe joint seal assemblies, including materials, dimensions, tolerances, and testing/verification procedures. This standard can be referenced in specifications for selecting...

Standards are a Valuable Resource

"AWWA has served the members and the water industry by dedicating staff and volunteer resources to this core program and has succeeded in enabling the continued development and expansion of industry standards."

- Paul Olson, Senior Manager of Standards Programs

PaulOlsen

Inside an AWWA Standard

Cover. The abbreviation for each standard name is located in the upper right corner of the cover. The last two digits of that title indicates the year the standard was approved. The bottom of the cover also states any applicable revision information.

Explanation. Each standard contains an overview of what an AWWA Standard is.

Committee Personnel.  Standards list the expert volunteers that are responsible for creating the standard. 

Use of this Standard.  The most important section of the foreword, it includes your options and alternatives. 

 

Body of the Standard.  Standards are divided into six sections:
I. General – provides the s cope, purpose and application of the standard 
II. Documents referenced
III. Definitions of terms used
IV. Requirements – minimum requirements for a product to meet the prescribed standard
V. Verification – tests for materials and manufacturing processes to ensure product quality
VI. Delivery – how the product can be packaged, marked and shipped

Appendices. These contain additional guidance and reference materials to aid the use of the standard.

F120

Standards Notices

standard-program

Standards Process

Each AWWA Standard is developed by a dedicated volunteer committee and is subjected to a rigorous formal approval process.

committee-pubs

Join a Committee

Give back to the water community by helping to develop or update an AWWA Standard. Find a Standards Committee of Interest.

technical-inquiries

Technical Inquiries

Direct any of your questions related to technical and operational information to our Department of Engineering & Technical Services.