The AWWA Standards Council has approved this standard for public comment. The publication of this information on the AWWA website begins the 30-day AWWA comment period for action on standards by the Standards Council. Purchase a review copy during the comment period for $20 each. AWWA Comment Period is now closed. Review copies are no longer available. Send comments to: Frank Kurtz 303.347.6221 phone 303.795.7603 fax The review copy will be edited for publication and may also be revised as appropriate based on any comments received during the public comment period. Therefore, this copy is not suitable for continued utilization and is intended only for comment purposes. Final publication of the standard may take several months. When it is available, a notice will be published in the official notice section of Journal – American Water Works Association . The standard becomes an effective AWWA standard on the first day of the month following such publication in Journal – American Water Works Association . SCOPE This standard describes cold-water meters used for residential fire sprinkler applications that meet the requirements of NFPA 13D in single- and two-family dwellings and manufactured homes, in sizes ¾ in. (20 mm) through 2 in. (50 mm), and the materials and workmanship employed in their fabrication. Meter types addressed in this standard for the purpose stated in Sec. 1.2 are positive displacement-type meters meeting the requirements of ANSI/AWWA C700 or C710, turbine-type meters meeting the requirements of ANSI/AWWA C701, multijet-type meters meeting the requirements of ANSI/AWWA C708, singlejet-type meters meeting the requirements of ANSI/AWWA C712, and fluidic-oscillator-type meters meeting the requirements of ANSI/AWWA C713. MAJOR REVISIONS This is the first edition of this standard.