Back to AWWA C153-11 Ductile-Iron Compact Fittings (PDF)

AWWA C153-11 Ductile-Iron Compact Fittings (PDF)

  • Max downloads: 10

Publisher: AWWA
Publication date: 2011
AWWA catalog no: STC_0074655
Media Type: PDF, Print
Number of pages: 52
DOI: http://dx.doi.org/10.12999/AWWA.C153.11
This standard describes 3-in. through 64-in. (80-mm through 1,600-mm) ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying potable water, wastewater and reclaimed water. Minimum working pressures by size range are as follows: 3 in. through 24 in. (80 mm through 600 mm): 350 psi (2,413 kPa); 30 in. through 48 in. (750 mm through 1,200 mm): 250 psi (1,724 kPa); and 54 in. through 64 in. (1,400 mm through 1,600 mm): 150 psi (1,034 kPa). Fittings are adequate for the rated working pressure plus a surge allowance of 100 psi or a surge allowance of half the rated working pressure, whichever is less. Fittings with mechanical joints are listed in this standard for the 3-in. through 48-in. (80-mm through 1,200-mm) sizes. The standard also may be used for fittings of these sizes with push-on joints or other joints as agreed on at the time of purchase. Fittings with push-on joints and flanged joints are listed in this standard for the 54-in. through 64-in. (1,400-mm through 1,600-mm) sizes. Fittings with flange joints are not discussed in this standard for sizes 3 in. through 48 in. (80 mm through 1,200 mm) because of the importance of standardized center-to-flange face dimensions for these sizes already described in ANSI/AWWA C110/A21.10. Fittings with plain ends are listed for bends and reducers of the 3-in. through 64-in. (80-mm through 1,600-mm) size range and for tees and crosses of the 54-in. through 64-in. (1,400-mm through 1,600-mm) size range. Major revisions to this edition of the standard are quite extensive and can be found in the foreward section.

Item Details:
This standard describes 3-in. through 64-in. (80-mm through 1,600-mm) ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying potable water, wastewater and reclaimed water. Minimum working pressures by size range...
Back to AWWA C153-11 Ductile-Iron Compact Fittings (PDF)
View More
  • List Price: $76.00 USD
  • Member Price: $47.00 USD

 
Want to save more?
to see if you qualify for a lower rate.
Members save: $29.00 USD or more
You might also like:
People who bought this also bought:
Historical Standards: